Wood: Spruce, Silver fir
SPRUCE – VISUAL QUALITY (B)
A construction element intended for the final interior design. The surface lamellas are of higher quality timber. The surface is sanded with repaired knots from branches of different sizes, closed, puttied, without colouring. Pulp is allowed to a lesser extent. Small abrasions and bumps to a depth of 1 mm and an area of 10 mm² are permitted. Defects on the edge of the panel are allowed up to 10 mm. The section surfaces and the milled surfaces always correspond to non-visual quality. When packed, the panels are interleaved with cardboard. Classification of quality according to the internal regulations of AGROP NOVA a.s.
SILVER FIR – VISUAL QUALITY (B)
Fir panels are characterized by a delicate balanced structure without knots. Surface lamellas without natural wood defects (not containing resin, resin ducts, resin pockets) are connected with an inlay finger joint. The final surface of the profile is resanded. It is particularly suitable for interiors and has similar mechanical properties as spruce. When packed, the panels are interleaved with cardboard. When packed, the panels are interleaved with cardboard. Classification of quality according to the internal regulations of AGROP NOVA a.s.
Sampler of profiles and surface finishes in pdf
The recommended relative humidity of the environment in which the NOVATOP panels are installed is in the range of 40–60% at 20 °C. As a result of low air humidity, cracks may appear in the wood. Warning: Wood properties of this product are maintained, so they respond to changes in temperature and humidity by shrinking or, possibly, by swelling. Improper storage and use in extreme conditions (extreme temperatures and humidity) can cause cracking and deformations.
Veneers: oak radial, oak tangential
Surface finishes: Adler glazing
.
You might be interested in
3D library
